DeMontrond Collision Center / I-CAR Certified Body Shops
  • Home
  • About
  • Locations
    • Houston
    • Northside
    • Texas City
    • Cleveland
    • Conroe
    • Bryan
    • Henley's (Bryan)
  • Consumer Services
    • Schedule An Appointment
    • Repair Authorization
    • Check Repair Status
  • Paint & Body
    • Repair Process
    • Employment

Repair PRocess

Prepare Estimate
During the estimate process, the vehicle is inspected and relevant data is entered into our Estimate Computer Systems. This data is complied into an estimate that determines the cost of repairs. Often there is hidden damage that cannot be seen until after the vehicle is disassembled.

Repair Authorization
Once the estimate is completed, the insurance company will review it. There may be some negotiations on the price and procedures required to repair the vehicle. The insurance company will determine if the vehicle is repairable. Once this process is completed, the vehicle begins the actual repair process.
Disassembly
In disassembly, hidden damage is often found and inner structure repairs are determined. Many times this will require scheduling an insurance re-inspection and ordering additional parts.
Order Parts
The required parts for your vehicle are ordered as soon as possible. Once these parts are received then the repair process can begin.
Structural Repair
In the Structure Repair area, the unitized body is returned back to the factory specification. A sophisticated measuring system is used to monitor all phases in this area. A computer based measurement system is used to analyze the frame of your vehicle. This system insures an accurate repair.

Body Repair
The Body Repair Department replaces exterior panels and all metal finishing that may be required. The vehicle begins to come back to life as sheet metal is installed and aligned. From here the vehicle will go to the Paint Preparations Department.

Paint & Refinishing
Paint Preparation is a critical step in the refinishing process of every vehicle. All repaired panels are prepped for paint by priming and sealing in order to insure proper adhesion of color and clearcoat guaranteeing a lifetime of shine.

Reassembly Process
Finally, moldings and detail pieces are put back on the vehicle in the reassembly area. All the vehicle’s systems are checked during this process. The vehicle is almost complete and ready for delivery when it is in this stage.
Detailing
In the Detailing area, the vehicle is hand washed, dried and lightly detailed inside and out to remove any dust or dirt that accumulated during the repair process. Then a final quality control inspection is performed.
Delivery
Delivery is the last step in the repair process. When the customer arrives to pick up the vehicle, the bill is explained, and the final paper work is completed. The customer drives away in the vehicle that has been restored to its pre-accident condition.
DeMontrond Collision Centers
© 2017-2021 All Rights Reserved
Locations >
Houston Location
Northside Location
Texas City Location
Cleveland Location
Conroe Location
Bryan Location
Henley's Location (Bryan)
Schedule an Appointment
Repair Authorization
Check Repair Status

About
Repair Process
Employment
  • Home
  • About
  • Locations
    • Houston
    • Northside
    • Texas City
    • Cleveland
    • Conroe
    • Bryan
    • Henley's (Bryan)
  • Consumer Services
    • Schedule An Appointment
    • Repair Authorization
    • Check Repair Status
  • Paint & Body
    • Repair Process
    • Employment